View M3900622-0441H_7078682.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

m39006/22, m39006/25 www.vishay.com vishay revison: 28-aug-12 1 document number: 40022 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 wet tantalum capacitors, military established reliability, mil-prf-39006/22/25 qualified styles clr79, clr81 features ? hermetically sealed ? metal cased ?axial lead ?tubular style, military specification ? clr79, m39006/22 mil-prf-39006/22 ? clr81, m39006/25 mil-prf-39006/25 performance characteristics operating temperature: - 55 c to + 125 c capacitance range: m39006/22 - 1.7 f to 1200 f; m39006/25 - 6.8 f to 2200 f capacitance tolerance: 5 %, 10 %, 20 % voltage rating: 6 v dc to 125 v dc established reliability tantal um capacitors to military specification mil-prf-39006: in accordance with the military specification mil-prf-39006 all capacitors are marked with the military pa rt number (m39006/xx-xxxx) rather than the older style de signation (clr79, clr81) and should be ordered as such. for information on the performa nce characteristics of these capacitors, please refer to th e latest issue of the military specification. mil-prf-39006 establishes 1000 h failure rate levels of 1 %, 0.1 %, and 0.01 %. when ordering these parts, care must be exercise d that the correct part number expressing the appropriate fa ilure level be specified. each order for military style capacitors requiring government inspection must state whether inspection is to be at the destination or at the vishay plant. orders requiring source inspection cannot be shipped until this has been accomplished. ordering information m39006 /22 -0441 h basic document number slash sheet dash number designation of high vibration (optional) indicates the basic specification; in this case mil-prf-39006 indicates the specification sheet of the basic military specification taken from standard/ extended ratings tables h, optional, if specified
m39006/22, m39006/25 www.vishay.com vishay revison: 28-aug-12 2 document number: 40022 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in inches [millimeters] case code bare case with insulating sleeve e lead length weight (oz./g) (max.) d l d (max.) l (max.) t1 0.188 0.016 [4.78 0.41] 0.453 + 0.031/- 0.016 [11.51 + 0.79/- 0.41] 0.219 [5.56] 0.515 [13.08] 1.500 0.250 [38.10 6.35] 0.09 [2.6] t2 0.281 0.016 [7.14 0.41] 0.641 + 0.031/- 0.016 [16.28 + 0.79/- 0.41] 0.312 [7.92] 0.704 [17.88] 2.250 0.250 [57.15 6.35] 0.22 [6.2] t3 0.375 0.016 [9.53 0.41] 0.766 + 0.031/- 0.016 [19.46 + 0.79/- 0.41] 0.406 [10.31] 0.828 [21.03] 2.250 0.250 [57.15 6.35] 0.41 [11.6] t4 0.375 0.016 [9.53 0.41] 1.062 + 0.031/- 0.016 [26.97 + 0.79/- 0.41] 0.406 [10.31] 1.126 [28.60] 2.250 0.250 [57.15 6.35] 0.62 [17.7] ratings and case codes - m39006/22 f 6 8 10 15 25 30 50 60 75 100 125 1.7 t1 2.5 t1 3.5 t1 3.6 t1 4.0 t1 4.7 t1 5.0 t1 6.8 t1 8.0 t1 8.2 t1 9.0 t2 10 t1 t1 11 t2 14 t2 15 t1 t1 t2 18 t3 20 t1 t2 22 t1 t2 25 t1 t2 t3 30 t1 t3 33 t1 t2 39 t2 40 t2 t3 43 t3 47 t1 t2 50 t2 t3 56 t1 t3 t4 60 t3 68 t1 t2 t3 70 t2 82 t3 e l e - + terminal welded to case tantalum feed-through 0.078 [1.98] max. dia. 0.250 [6.35] max. term. loc. within 0.031 [0.79] r of true position glass case circuit diagram external weld insulating sleeve d dia. 0.025 0.002 [0.64 0.05] 0.094 [2.38] max. style clr79 style clr81
m39006/22, m39006/25 www.vishay.com vishay revison: 28-aug-12 3 document number: 40022 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 86 t4 100 t2 t2 t3 110 t4 120 t2 t2 t3 140 t2 t4 150 t3 160 t4 170 t3 180 t2 t3 220 t2 250 t3 270 t2 t3 290 t3 300 t4 330 t3 350 t4 390 t3 430 t3 540 t4 560 t3 750 t4 850 t4 1200 t4 ratings and case codes - m39006/25 f 6 8 10 15 25 30 50 60 75 100 125 6.8 t1 10 t1 22 t1 27 t1 t2 33 t1 39 t2 47 t3 56 t1 68 t1 t3 82 t2 t4 100 t1 t2 120 t2 t4 150 t1 180 t1 t3 220 t1 t2 t3 t4 270 t2 t3 t4 330 t4 390 t2 470 t3 560 t2 t3 t4 680 t2 t4 820 t2 t3 1000 t4 1200 t3 1500 t3 t3 t4 1800 t4 2200 t4 ratings and case codes - m39006/22 f 6 8 10 15 25 30 50 60 75 100 125
m39006/22, m39006/25 www.vishay.com vishay revison: 28-aug-12 4 document number: 40022 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 standard ratings/extended ratings: clr79, m39006/22-xxxx capacitance (f) case code cap. tol. ( %) part no. m39006/22- (1) failure rate level (%/1000 h) max. dcl (a) at max. df at + 25 c (%) max. imp. at - 55 c ( ? ) max. capacitance change (%) at max. (2) ripple current at + 85 c 40 khz (ma) m 1.0 p 0.1 r 0.01 + 25 c + 85 c + 125 c - 55 c + 85 c + 125 c 6 v dc at + 85 c; 4 v dc at + 125 c 30 t1 20 0001 0221 0441 1.0 2.0 9 100 - 40 + 10.5 + 12 820 30 t1 10 0002 0222 0442 1.0 2.0 9 100 - 40 + 10.5 + 12 820 30 t1 5 0003 0223 0443 1.0 2.0 9 100 - 40 + 10.5 + 12 820 68 t1 20 0004 0224 0444 1.0 2.0 15 60 - 40 + 14 + 16 960 68 t1 10 0005 0225 0445 1.0 2.0 15 60 - 40 + 14 + 16 960 68 t1 5 0006 0226 0446 1.0 2.0 15 60 - 40 + 14 + 16 960 140 t2 20 0007 0227 0447 1.0 3.0 21 40 - 40 + 14 + 16 1200 140 t2 10 0008 0228 0448 1.0 3.0 21 40 - 40 + 14 + 16 1200 140 t2 5 0009 0229 0449 1.0 3.0 21 40 - 40 + 14 + 16 1200 270 t2 20 0010 0230 0450 1.0 6.5 45 25 - 44 + 17.5 + 20 1375 270 t2 10 0011 0231 0451 1.0 6.5 45 25 - 44 + 17.5 + 20 1375 270 t2 5 0012 0232 0452 1.0 6.5 45 25 - 44 + 17.5 + 20 1375 330 t3 20 0013 0233 0453 2.0 7.9 36 20 - 44 + 14 + 16 1800 330 t3 10 0014 0234 0454 2.0 7.9 36 20 - 44 + 14 + 16 1800 330 t3 5 0015 0235 0455 2.0 7.9 36 20 - 44 + 14 + 16 1800 560 t3 20 0016 0236 0456 2.0 13.0 55 25 - 64 + 17.5 + 20 1900 560 t3 10 0017 0237 0457 2.0 13.0 55 25 - 64 + 17.5 + 20 1900 560 t3 5 0018 0238 0458 2.0 13.0 55 25 - 64 + 17.5 + 20 1900 1200 t4 20 0019 0239 0459 3.0 14.0 90 20 - 80 + 25 + 25 2265 1200 t4 10 0020 0240 0460 3.0 14.0 90 20 - 80 + 25 + 25 2265 8 v dc at + 85 c; 5 v dc at + 125 c 25 t1 20 0021 0241 0461 1.0 2.0 7.5 100 - 40 + 10.5 + 12 820 25 t1 10 0022 0242 0462 1.0 2.0 7.5 100 - 40 + 10.5 + 12 820 25 t1 5 0023 0243 0463 1.0 2.0 7.5 100 - 40 + 10.5 + 12 820 56 t1 20 0024 0244 0464 1.0 2.0 14 59 - 40 + 14 + 16 900 56 t1 10 0025 0245 0465 1.0 2.0 14 59 - 40 + 14 + 16 900 56 t1 5 0026 0246 0466 1.0 2.0 14 59 - 40 + 14 + 16 900 120 t2 20 0027 0247 0467 1.0 2.0 20 50 - 44 + 17.5 + 20 1220 120 t2 10 0028 0248 0468 1.0 2.0 20 50 - 44 + 17.5 + 20 1220 120 t2 5 0029 0249 0469 1.0 2.0 20 50 - 44 + 17.5 + 20 1220 220 t2 20 0030 0250 0470 1.0 7.0 37 30 - 44 + 17.5 + 20 1370 220 t2 10 0031 0251 0471 1.0 7.0 37 30 - 44 + 17.5 + 20 1370 220 t2 5 0032 0252 0472 1.0 7.0 37 30 - 44 + 17.5 + 20 1370 290 t3 20 0033 0253 0473 2.0 6.0 34 25 - 64 + 17.5 + 20 1770 290 t3 10 0034 0254 0474 2.0 6.0 34 25 - 64 + 17.5 + 20 1770 290 t3 5 0035 0255 0475 2.0 6.0 34 25 - 64 + 17.5 + 20 1770 430 t3 20 0036 0256 0476 2.0 14.0 46 25 - 64 + 17.5 + 20 1825 430 t3 10 0037 0257 0477 2.0 14.0 46 25 - 64 + 17.5 + 20 1825 430 t3 5 0038 0258 0478 2.0 14.0 46 25 - 64 + 17.5 + 20 1825 850 t4 20 0039 0259 0479 4.0 16.0 60 22 - 80 + 25 + 25 2330 850 t4 10 0040 0260 0480 4.0 16.0 60 22 - 80 + 25 + 25 2330 10 v dc at + 85 c; 7 v dc at + 125 c 20 t1 20 0041 0261 0481 1.0 2.0 6 175 - 32 + 10.5 + 12 820 20 t1 10 0042 0262 0482 1.0 2.0 6 175 - 32 + 10.5 + 12 820 20 t1 5 0043 0263 0483 1.0 2.0 6 175 - 32 + 10.5 + 12 820 47 t1 20 0044 0264 0484 1.0 2.0 13 100 - 36 + 14 + 16 855 47 t1 10 0045 0265 0485 1.0 2.0 13 100 - 36 + 14 + 16 855 47 t1 5 0046 0266 0486 1.0 2.0 13 100 - 36 + 14 + 16 855 100 t2 20 0047 0267 0487 1.0 4.0 15 60 - 36 + 14 + 16 1200 100 t2 10 0048 0268 0488 1.0 4.0 15 60 - 36 + 14 + 16 1200 100 t2 5 0049 0269 0489 1.0 4.0 15 60 - 36 + 14 + 16 1200 180 t2 20 0050 0270 0490 1.0 7.0 30 40 - 36 + 14 + 16 1365 notes (1) dash number will include the letter h to indicate the optional vibrat ion and shock requ irements (i.e., 51 g random vibration, 80 g sinusoidal vibration and 500 g shock). (2) for ripple current limits at various temperatures, voltages and frequencies, see ripple current table.
m39006/22, m39006/25 www.vishay.com vishay revison: 28-aug-12 5 document number: 40022 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 10 v dc at + 85 c; 7 v dc at + 125 c 180 t2 10 0051 0271 0491 1.0 7.0 30 40 - 36 + 14 + 16 1365 180 t2 5 0052 0272 0492 1.0 7.0 30 40 - 36 + 14 + 16 1365 250 t3 20 0053 0273 0493 2.0 10.0 30 30 - 40 + 14 + 16 1720 250 t3 10 0054 0274 0494 2.0 10.0 30 30 - 40 + 14 + 16 1720 250 t3 5 0055 0275 0495 2.0 10.0 30 30 - 40 + 14 + 16 1720 390 t3 20 0056 0276 0496 2.0 16.0 44 25 - 64 + 17.5 + 20 1800 390 t3 10 0057 0277 0497 2.0 16.0 44 25 - 64 + 17.5 + 20 1800 390 t3 5 0058 0278 0498 2.0 16.0 44 25 - 64 + 17.5 + 20 1800 750 t4 20 0059 0279 0499 4.0 16.0 50 23 - 80 + 25 + 25 2360 750 t4 10 0060 0280 0500 4.0 16.0 50 23 - 80 + 25 + 25 2360 15 v dc at + 85 c; 10 v dc at + 125 c 15 t1 20 0061 0281 0501 1.0 2.0 5 155 - 24 + 10.5 + 12 780 15 t1 10 0062 0282 0502 1.0 2.0 5 155 - 24 + 10.5 + 12 780 15 t1 5 0063 0283 0503 1.0 2.0 5 155 - 24 + 10.5 + 12 780 33 t1 20 0064 0284 0504 1.0 2.0 10 90 - 28 + 14 + 16 820 33 t1 10 0065 0285 0505 1.0 2.0 10 90 - 28 + 14 + 16 820 33 t1 5 0066 0286 0506 1.0 2.0 10 90 - 28 + 14 + 16 820 70 t2 20 0067 0287 0507 1.0 4.0 13 75 - 28 + 14 + 16 1150 70 t2 10 0068 0288 0508 1.0 4.0 13 75 - 28 + 14 + 16 1150 70 t2 5 0069 0289 0509 1.0 4.0 13 75 - 28 + 14 + 16 1150 120 t2 20 0070 0290 0510 1.0 7.0 18 50 - 28 + 17.5 + 20 1450 120 t2 10 0071 0291 0511 1.0 7.0 18 50 - 28 + 17.5 + 20 1450 120 t2 5 0072 0292 0512 1.0 7.0 18 50 - 28 + 17.5 + 20 1450 170 t3 20 0073 0293 0513 2.0 10.0 25 35 - 32 + 14 + 16 1480 170 t3 10 0074 0294 0514 2.0 10.0 25 35 - 32 + 14 + 16 1480 170 t3 5 0075 0295 0515 2.0 10.0 25 35 - 32 + 14 + 16 1480 270 t3 20 0076 0296 0516 2.0 16.0 32 30 - 56 + 17.5 + 20 1740 270 t3 10 0077 0297 0517 2.0 16.0 32 30 - 56 + 17.5 + 20 1740 270 t3 5 0078 0298 0518 2.0 16.0 32 30 - 56 + 17.5 + 20 1740 540 t4 20 0079 0299 0519 6.0 24.0 40 23 - 80 + 25 + 25 2330 540 t4 10 0080 0300 0520 6.0 24.0 40 23 - 80 + 25 + 25 2330 25 v dc at + 85 c; 15 v dc at + 125 c 10 t1 20 0081 0301 0521 1.0 2.0 4 220 - 16 + 8 + 9 715 10 t1 10 0082 0302 0522 1.0 2.0 4 220 - 16 + 8 + 9 715 10 t1 5 0083 0303 0523 1.0 2.0 4 220 - 16 + 8 + 9 715 22 t1 20 0084 0304 0524 1.0 2.0 6.6 140 - 20 + 10.5 + 12 825 22 t1 10 0085 0305 0525 1.0 2.0 6.6 140 - 20 + 10.5 + 12 825 22 t1 5 0086 0306 0526 1.0 2.0 6.6 140 - 20 + 10.5 + 12 825 50 t2 20 0087 0307 0527 1.0 2.0 11.0 70 - 28 + 13 + 15 1130 50 t2 10 0088 0308 0528 1.0 2.0 11.0 70 - 28 + 13 + 15 1130 50 t2 5 0089 0309 0529 1.0 2.0 11.0 70 - 28 + 13 + 15 1130 100 t2 20 0090 0310 0530 1.0 10.0 15 50 - 28 + 13 + 15 1435 100 t2 10 0091 0311 0531 1.0 10.0 15 50 - 28 + 13 + 15 1435 100 t2 5 0092 0312 0532 1.0 10.0 15 50 - 28 + 13 + 15 1435 120 t3 20 0093 0313 0533 2.0 6.0 21 38 - 32 + 13 + 15 1450 120 t3 10 0094 0314 0534 2.0 6.0 21 38 - 32 + 13 + 15 1450 120 t3 5 0095 0315 0535 2.0 6.0 21 38 - 32 + 13 + 15 1450 180 t3 20 0096 0316 0536 2.0 18.0 26 32 - 48 + 13 + 15 1525 180 t3 10 0097 0317 0537 2.0 18.0 26 32 - 48 + 13 + 15 1525 180 t3 5 0098 0318 0538 2.0 18.0 26 32 - 48 + 13 + 15 1525 350 t4 20 0099 0319 0539 7.0 28.0 35 24 - 70 + 25 + 25 1970 350 t4 10 0100 0320 0540 7.0 28.0 35 24 - 70 + 25 + 25 1970 standard ratings/extended ratings: clr79, m39006/22-xxxx capacitance (f) case code cap. tol. ( %) part no. m39006/22- (1) failure rate level (%/1000 h) max. dcl (a) at max. df at + 25 c (%) max. imp. at - 55 c ( ? ) max. capacitance change (%) at max. (2) ripple current at + 85 c 40 khz (ma) m 1.0 p 0.1 r 0.01 + 25 c + 85 c + 125 c - 55 c + 85 c + 125 c notes (1) dash number will include the letter h to indicate the optional vibrat ion and shock requ irements (i.e., 51 g random vibration, 80 g sinusoidal vibration and 500 g shock). (2) for ripple current limits at various temperatures, voltages and frequencies, see ripple current table.
m39006/22, m39006/25 www.vishay.com vishay revison: 28-aug-12 6 document number: 40022 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 30 v dc at + 85 c; 20 v dc at + 125 c 8.0 t1 20 0101 0321 0541 1.0 2.0 4 275 - 16 + 8 + 12 640 8.0 t1 10 0102 0322 0542 1.0 2.0 4 275 - 16 + 8 + 12 640 8.0 t1 5 0103 0323 0543 1.0 2.0 4 275 - 16 + 8 + 12 640 15 t1 20 0104 0324 0544 1.0 2.0 5 175 - 20 + 10.5 + 12 780 15 t1 10 0105 0325 0545 1.0 2.0 5 175 - 20 + 10.5 + 12 780 15 t1 5 0106 0326 0546 1.0 2.0 5 175 - 20 + 10.5 + 12 780 40 t2 20 0107 0327 0547 1.0 5.0 10 65 - 24 + 10.5 + 12 1120 40 t2 10 0108 0328 0548 1.0 5.0 10 65 - 24 + 10.5 + 12 1120 40 t2 5 0109 0329 0549 1.0 5.0 10 65 - 24 + 10.5 + 12 1120 68 t2 20 0110 0330 0550 1.0 8.0 13 60 - 24 + 13 + 15 1285 68 t2 10 0111 0331 0551 1.0 8.0 13 60 - 24 + 13 + 15 1285 68 t2 5 0112 0332 0552 1.0 8.0 13 60 - 24 + 13 + 15 1285 100 t3 20 0113 0333 0553 2.0 12.0 17 40 - 28 + 10.5 + 12 1450 100 t3 10 0114 0334 0554 2.0 12.0 17 40 - 28 + 10.5 + 12 1450 100 t3 5 0115 0335 0555 2.0 12.0 17 40 - 28 + 10.5 + 12 1450 150 t3 20 0116 0336 0556 2.0 18.0 23 35 - 48 + 13 + 15 1525 150 t3 10 0117 0337 0557 2.0 18.0 23 35 - 48 + 13 + 15 1525 150 t3 5 0118 0338 0558 2.0 18.0 23 35 - 48 + 13 + 15 1525 300 t4 20 0119 0339 0559 8.0 32.0 31 25 - 60 + 25 + 25 1950 300 t4 10 0120 0340 0560 8.0 32.0 31 25 - 60 + 25 + 25 1950 50 v dc at + 85 c; 30 v dc at + 125 c 5.0 t1 20 0121 0341 0561 1.0 2.0 3 400 - 16 + 5 + 6 580 5.0 t1 10 0122 0342 0562 1.0 2.0 3 400 - 16 + 5 + 6 580 5.0 t1 5 0123 0343 0563 1.0 2.0 3 400 - 16 + 5 + 6 580 10 t1 20 0124 0344 0564 1.0 2.0 4 250 - 24 + 8 + 9 715 10 t1 10 0125 0345 0565 1.0 2.0 4 250 - 24 + 8 + 9 715 10 t1 5 0126 0346 0566 1.0 2.0 4 250 - 24 + 8 + 9 715 25 t2 20 0127 0347 0567 1.0 5.0 8 95 - 20 + 10.5 + 12 1005 25 t2 10 0128 0348 0568 1.0 5.0 8 95 - 20 + 10.5 + 12 1005 25 t2 5 0129 0349 0569 1.0 5.0 8 95 - 20 + 10.5 + 12 1005 47 t2 20 0130 0350 0570 1.0 9.0 11 70 - 28 + 13 + 15 1155 47 t2 10 0131 0351 0571 1.0 9.0 11 70 - 28 + 13 + 15 1155 47 t2 5 0132 0352 0572 1.0 9.0 11 70 - 28 + 13 + 15 1155 60 t3 20 0133 0353 0573 2.0 12.0 12 45 - 16 + 10.5 + 12 1335 60 t3 10 0134 0354 0574 2.0 12.0 12 45 - 16 + 10.5 + 12 1335 60 t3 5 0135 0355 0575 2.0 12.0 12 45 - 16 + 10.5 + 12 1335 82 t3 20 0136 0356 0576 2.0 16.0 15 45 - 32 + 13 + 15 1400 82 t3 10 0137 0357 0577 2.0 16.0 15 45 - 32 + 13 + 15 1400 82 t3 5 0138 0358 0578 2.0 16.0 15 45 - 32 + 13 + 15 1400 160 t4 20 0139 0359 0579 8.0 32.0 17 27 - 50 + 25 + 25 1900 160 t4 10 0140 0360 0580 8.0 32.0 17 27 - 50 + 25 + 25 1900 60 v dc at + 85 c; 40 v dc at + 125 c 4.0 t1 20 0141 0361 0581 1.0 2.0 2.8 550 - 16 + 5 + 6 525 4.0 t1 10 0142 0362 0582 1.0 2.0 2.8 550 - 16 + 5 + 6 525 4.0 t1 5 0143 0363 0583 1.0 2.0 2.8 550 - 16 + 5 + 6 525 8.2 t1 20 0144 0364 0584 1.0 2.0 4 275 - 24 + 8 + 9 625 8.2 t1 10 0145 0365 0585 1.0 2.0 4 275 - 24 + 8 + 9 625 8.2 t1 5 0146 0366 0586 1.0 2.0 4 275 - 24 + 8 + 9 625 20 t2 20 0147 0367 0587 1.0 5.0 7 105 - 16 + 10.5 + 12 930 20 t2 10 0148 0368 0588 1.0 5.0 7 105 - 16 + 10.5 + 12 930 20 t2 5 0149 0369 0589 1.0 5.0 7 105 - 16 + 10.5 + 12 930 39 t2 20 0150 0370 0590 1.0 9.0 10 90 - 28 + 10.5 + 12 1110 standard ratings/extended ratings: clr79, m39006/22-xxxx capacitance (f) case code cap. tol. ( %) part no. m39006/22- (1) failure rate level (%/1000 h) max. dcl (a) at max. df at + 25 c (%) max. imp. at - 55 c ( ? ) max. capacitance change (%) at max. (2) ripple current at + 85 c 40 khz (ma) m 1.0 p 0.1 r 0.01 + 25 c + 85 c + 125 c - 55 c + 85 c + 125 c notes (1) dash number will include the letter h to indicate the optional vibrat ion and shock requ irements (i.e., 51 g random vibration, 80 g sinusoidal vibration and 500 g shock). (2) for ripple current limits at various temperatures, voltages and frequencies, see ripple current table.
m39006/22, m39006/25 www.vishay.com vishay revison: 28-aug-12 7 document number: 40022 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 60 v dc at + 85 c; 40 v dc at + 125 c 39 t2 10 0151 0371 0591 1.0 9.0 10 90 - 28 + 10.5 + 12 1110 39 t2 5 0152 0372 0592 1.0 9.0 10 90 - 28 + 10.5 + 12 1110 50 t3 20 0153 0373 0593 2.0 12.0 10 50 - 16 + 10.5 + 12 1330 50 t3 10 0154 0374 0594 2.0 12.0 10 50 - 16 + 10.5 + 12 1330 50 t3 5 0155 0375 0595 2.0 12.0 10 50 - 16 + 10.5 + 12 1330 68 t3 20 0156 0376 0596 2.0 16.0 13 50 - 32 + 10.5 + 12 1365 68 t3 10 0157 0377 0597 2.0 16.0 13 50 - 32 + 10.5 + 12 1365 68 t3 5 0158 0378 0598 2.0 16.0 13 50 - 32 + 10.5 + 12 1365 140 t4 20 0159 0379 0599 8.0 32.0 16 28 - 40 + 20 + 20 1850 140 t4 10 0160 0380 0600 8.0 32.0 16 28 - 40 + 20 + 20 1850 75 v dc at + 85 c; 50 v dc at + 125 c 3.5 t1 20 0161 0381 0601 1.0 2.0 2.5 650 - 16 + 5 + 6 525 3.5 t1 10 0162 0382 0602 1.0 2.0 2.5 650 - 16 + 5 + 6 525 3.5 t1 5 0163 0383 0603 1.0 2.0 2.5 650 - 16 + 5 + 6 525 6.8 t1 20 0164 0384 0604 1.0 2.0 3.5 300 - 20 + 8 + 9 610 6.8 t1 10 0165 0385 0605 1.0 2.0 3.5 300 - 20 + 8 + 9 610 6.8 t1 5 0166 0386 0606 1.0 2.0 3.5 300 - 20 + 8 + 9 610 15 t2 20 0167 0387 0607 1.0 5.0 6 150 - 16 + 8 + 9 890 15 t2 10 0168 0388 0608 1.0 5.0 6 150 - 16 + 8 + 9 890 15 t2 5 0169 0389 0609 1.0 5.0 6 150 - 16 + 8 + 9 890 33 t2 20 0170 0390 0610 1.0 10.0 10 90 - 24 + 10.5 + 15 1000 33 t2 10 0171 0391 0611 1.0 10.0 10 90 - 24 + 10.5 + 15 1000 33 t2 5 0172 0392 0612 1.0 10.0 10 90 - 24 + 10.5 + 15 1000 40 t3 20 0173 0393 0613 2.0 12.0 9 60 - 16 + 10.5 + 12 1250 40 t3 10 0174 0394 0614 2.0 12.0 9 60 - 16 + 10.5 + 12 1250 40 t3 5 0175 0395 0615 2.0 12.0 9 60 - 16 + 10.5 + 12 1250 56 t3 20 0176 0396 0616 2.0 17.0 11 60 - 28 + 10.5 + 15 1335 56 t3 10 0177 0397 0617 2.0 17.0 11 60 - 28 + 10.5 + 15 1335 56 t3 5 0178 0398 0618 2.0 17.0 11 60 - 28 + 10.5 + 15 1335 110 t4 20 0179 0399 0619 9.0 36.0 12 29 - 35 + 20 + 20 1850 110 t4 10 0180 0400 0620 9.0 36.0 12 29 - 35 + 20 + 20 1850 100 v dc at + 85 c; 65 v dc at + 125 c 2.5 t1 20 0181 0401 0621 1.0 2.0 2 950 - 16 + 7 + 8 505 2.5 t1 10 0182 0402 0622 1.0 2.0 2 950 - 16 + 7 + 8 505 2.5 t1 5 0183 0403 0623 1.0 2.0 2 950 - 16 + 7 + 8 505 4.7 t1 20 0184 0404 0624 1.0 2.0 3 500 - 16 + 7 + 8 565 4.7 t1 10 0185 0405 0625 1.0 2.0 3 500 - 16 + 7 + 8 565 4.7 t1 5 0186 0406 0626 1.0 2.0 3 500 - 16 + 7 + 8 565 11 t2 20 0187 0407 0627 1.0 4.0 5 200 - 16 + 8 + 8 835 11 t2 10 0188 0408 0628 1.0 4.0 5 200 - 16 + 8 + 8 835 11 t2 5 0189 0409 0629 1.0 4.0 5 200 - 16 + 8 + 8 835 22 t2 20 0190 0410 0630 1.0 9.0 7.5 100 - 16 + 8 + 8 965 22 t2 10 0191 0411 0631 1.0 9.0 7.5 100 - 16 + 8 + 8 965 22 t2 5 0192 0412 0632 1.0 9.0 7.5 100 - 16 + 8 + 8 965 30 t3 20 0193 0413 0633 2.0 12.0 7 80 - 16 + 8 + 8 1240 30 t3 10 0194 0414 0634 2.0 12.0 7 80 - 16 + 8 + 8 1240 30 t3 5 0195 0415 0635 2.0 12.0 7 80 - 16 + 8 + 8 1240 43 t3 20 0196 0416 0636 2.0 17.0 8.5 70 - 20 + 8 + 8 1335 43 t3 10 0197 0417 0637 2.0 17.0 8.5 70 - 20 + 8 + 8 1335 43 t3 5 0198 0418 0638 2.0 17.0 8.5 70 - 20 + 8 + 8 1335 86 t4 20 0199 0419 0639 9.0 36.0 10 30 - 25 + 15 + 15 1800 86 t4 10 0200 0420 0640 9.0 36.0 10 30 - 25 + 15 + 15 1800 standard ratings/extended ratings: clr79, m39006/22-xxxx capacitance (f) case code cap. tol. ( %) part no. m39006/22- (1) failure rate level (%/1000 h) max. dcl (a) at max. df at + 25 c (%) max. imp. at - 55 c ( ? ) max. capacitance change (%) at max. (2) ripple current at + 85 c 40 khz (ma) m 1.0 p 0.1 r 0.01 + 25 c + 85 c + 125 c - 55 c + 85 c + 125 c notes (1) dash number will include the letter h to indicate the optional vibrat ion and shock requ irements (i.e., 51 g random vibration, 80 g sinusoidal vibration and 500 g shock). (2) for ripple current limits at various temperatures, voltages and frequencies, see ripple current table.
m39006/22, m39006/25 www.vishay.com vishay revison: 28-aug-12 8 document number: 40022 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 125 v dc at + 85 c; 85 v dc at + 125 c 1.7 t1 20 0201 0421 0641 1.0 2.0 2 1250 - 16 + 7 + 8 415 1.7 t1 10 0202 0422 0642 1.0 2.0 2 1250 - 16 + 7 + 8 415 1.7 t1 5 0203 0423 0643 1.0 2.0 2 1250 - 16 + 7 + 8 415 3.6 t1 20 0204 0424 0644 1.0 2.0 2.7 600 - 16 + 7 + 8 520 3.6 t1 10 0205 0425 0645 1.0 2.0 2.7 600 - 16 + 7 + 8 520 3.6 t1 5 0206 0426 0646 1.0 2.0 2.7 600 - 16 + 7 + 8 520 9.0 t2 20 0207 0427 0647 1.0 5.0 5 240 - 16 + 7 + 8 755 9.0 t2 10 0208 0428 0648 1.0 5.0 5 240 - 16 + 7 + 8 755 9.0 t2 5 0209 0429 0649 1.0 5.0 5 240 - 16 + 7 + 8 755 14 t2 20 0210 0430 0650 1.0 7.0 6 167 - 16 + 7 + 8 860 14 t2 10 0211 0431 0651 1.0 7.0 6 167 - 16 + 7 + 8 860 14 t2 5 0212 0432 0652 1.0 7.0 6 167 - 16 + 7 + 8 860 18 t3 20 0213 0433 0653 2.0 9.0 5 129 - 16 + 7 + 8 1130 18 t3 10 0214 0434 0654 2.0 9.0 5 129 - 16 + 7 + 8 1130 18 t3 5 0215 0435 0655 2.0 9.0 5 129 - 16 + 7 + 8 1130 25 t3 20 0216 0436 0656 2.0 13.0 6 93 - 16 + 7 + 8 1200 25 t3 10 0217 0437 0657 2.0 13.0 6 93 - 16 + 7 + 8 1200 25 t3 5 0218 0438 0658 2.0 13.0 6 93 - 16 + 7 + 8 1200 56 t4 20 0219 0439 0659 10.0 40.0 6.5 32 - 25 + 15 + 15 1800 56 t4 10 0220 0440 0660 10.0 40.0 6.5 32 - 25 + 15 + 15 1800 standard ratings/extended ratings: clr81, m39006/25-xxxx capacitance (f) case code cap. tol. ( %) part no. m39006/25- (1) failure rate level (%/1000 h) max. dcl (a) at max. df at + 25 c (%) max. imp. at - 55 c ( ? ) max. capacitance change (%) at max. (1) ripple current at + 85 c 40 khz (ma) m 1.0 p 0.1 r 0.01 + 25 c + 85 c + 125 c - 55 c + 85 c + 125 c 6 v dc at + 85 c; 4 v dc at + 125 c 220 t1 20 0001 0089 0177 2.0 9.0 50 36 - 64 + 13 + 16 1000 220 t1 10 0002 0090 0178 2.0 9.0 50 36 - 64 + 13 + 16 1000 820 t2 20 0003 0091 0179 3.0 14.0 155 18 - 88 + 16 + 20 1500 820 t2 10 0004 0092 0180 3.0 14.0 155 18 - 88 + 16 + 20 1500 1500 t3 20 0005 0093 0181 5.0 20.0 172 18 - 90 + 20 + 25 1900 1500 t3 10 0006 0094 0182 5.0 20.0 172 18 - 90 + 20 + 25 1900 2200 t4 20 0007 0095 0183 6.0 24.0 170 13 - 90 + 25 + 30 2300 2200 t4 10 0008 0096 0184 6.0 24.0 170 13 - 90 + 25 + 30 2300 8 v dc at + 85 c; 5 v dc at + 125 c 180 t1 20 0009 0097 0185 2.0 9.0 41 45 - 60 + 13 + 16 1000 180 t1 10 0010 0098 0186 2.0 9.0 41 45 - 60 + 13 + 16 1000 680 t2 20 0011 0099 0187 3.0 14.0 130 22 - 83 + 16 + 20 1500 680 t2 10 0012 0100 0188 3.0 14.0 130 22 - 83 + 16 + 20 1500 1500 t3 20 0013 0101 0189 5.0 20.0 170 18 - 90 + 20 + 25 1900 1500 t3 10 0014 0102 0190 5.0 20.0 170 18 - 90 + 20 + 25 1900 1800 t4 20 0015 0103 0191 7.0 25.0 138 14 - 90 + 25 + 30 2300 1800 t4 10 0016 0104 0192 7.0 25.0 138 14 - 90 + 25 + 30 2300 notes (1) dash number will include the letter h to indicate the optional vibrat ion and shock requ irements (i.e., 51 g random vibration, 80 g sinusoidal vibration and 500 g shock). (2) for ripple current limits at various temperatures, voltages and frequencies, see ripple current table. standard ratings/extended ratings: clr79, m39006/22-xxxx capacitance (f) case code cap. tol. ( %) part no. m39006/22- (1) failure rate level (%/1000 h) max. dcl (a) at max. df at + 25 c (%) max. imp. at - 55 c ( ? ) max. capacitance change (%) at max. (2) ripple current at + 85 c 40 khz (ma) m 1.0 p 0.1 r 0.01 + 25 c + 85 c + 125 c - 55 c + 85 c + 125 c notes (1) dash number will include the letter h to indicate the optional vibrat ion and shock requ irements (i.e., 51 g random vibration, 80 g sinusoidal vibration and 500 g shock). (2) for ripple current limits at various temperatures, voltages and frequencies, see ripple current table.
m39006/22, m39006/25 www.vishay.com vishay revison: 28-aug-12 9 document number: 40022 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 10 v dc at + 85 c; 7 v dc at + 125 c 150 t1 20 0017 0105 0193 2.0 9.0 34 54 - 55 + 13 + 16 900 150 t1 10 0018 0106 0194 2.0 9.0 34 54 - 55 + 13 + 16 900 560 t2 20 0019 0107 0195 3.0 16.0 106 27 - 77 + 16 + 20 1450 560 t2 10 0020 0108 0196 3.0 16.0 106 27 - 77 + 16 + 20 1450 1200 t3 20 0021 0109 0197 5.0 20.0 137 18 - 88 + 20 + 25 1850 1200 t3 10 0022 0110 0198 5.0 20.0 137 18 - 88 + 20 + 25 1850 1500 t4 20 0023 0111 0199 7.0 25.0 114 15 - 88 + 25 + 30 2300 1500 t4 10 0024 0112 0200 7.0 25.0 114 15 - 88 + 25 + 30 2300 15 v dc at + 85 c; 10 v dc at + 125 c 100 t1 20 0025 0113 0201 2.0 9.0 30 72 - 44 + 13 + 16 900 100 t1 10 0026 0114 0202 2.0 9.0 30 72 - 44 + 13 + 16 900 390 t2 20 0027 0115 0203 3.0 16.0 74 31 - 66 + 16 + 20 1450 390 t2 10 0028 0116 0204 3.0 16.0 74 31 - 66 + 16 + 20 1450 820 t3 20 0029 0117 0205 6.0 24.0 111 22 - 77 + 20 + 25 1800 820 t3 10 0030 0118 0206 6.0 24.0 111 22 - 77 + 20 + 25 1800 1000 t4 20 0031 0119 0207 8.0 32.0 92 17 - 77 + 25 + 30 2300 1000 t4 10 0032 0120 0208 8.0 32.0 92 17 - 77 + 25 + 30 2300 25 v dc at + 85 c; 15 v dc at + 125 c 68 t1 20 0033 0121 0209 2.0 9.0 22 90 - 40 + 12 + 15 850 68 t1 10 0034 0122 0210 2.0 9.0 22 90 - 40 + 12 + 15 850 270 t2 20 0035 0123 0211 3.0 16.0 55 33 - 62 + 13 + 16 1400 270 t2 10 0036 0124 0212 3.0 16.0 55 33 - 62 + 13 + 16 1400 560 t3 20 0037 0125 0213 7.0 28.0 76 24 - 72 + 20 + 25 1750 560 t3 10 0038 0126 0214 7.0 28.0 76 24 - 72 + 20 + 25 1750 680 t4 20 0039 0127 0215 8.0 32.0 63 19 - 72 + 25 + 30 2100 680 t4 10 0040 0128 0216 8.0 32.0 63 19 - 72 + 25 + 30 2100 30 v dc at + 85 c; 20 v dc at + 125 c 56 t1 20 0041 0129 0217 2.0 9.0 22 100 - 38 + 12 + 15 800 56 t1 10 0042 0130 0218 2.0 9.0 22 100 - 38 + 12 + 15 800 220 t2 20 0043 0131 0219 3.0 16.0 42 36 - 60 + 13 + 16 1200 220 t2 10 0044 0132 0220 3.0 16.0 42 36 - 60 + 13 + 16 1200 470 t3 20 0045 0133 0221 8.0 32.0 64 25 - 65 + 20 + 25 1500 470 t3 10 0046 0134 0222 8.0 32.0 64 25 - 65 + 20 + 25 1500 560 t4 20 0047 0135 0223 9.0 36.0 55 20 - 65 + 25 + 30 2000 560 t4 10 0048 0136 0224 9.0 36.0 55 20 - 65 + 25 + 30 2000 50 v dc at + 85 c; 30 v dc at + 125 c 33 t1 20 0049 0137 0225 2.0 9.0 12.3 135 - 29 + 10 + 12 700 33 t1 10 0050 0138 0226 2.0 9.0 12.3 135 - 29 + 10 + 12 700 120 t2 20 0051 0139 0227 4.0 24.0 22.5 49 - 42 + 12 + 15 1200 120 t2 10 0052 0140 0228 4.0 24.0 22.5 49 - 42 + 12 + 15 1200 270 t3 20 0053 0141 0229 8.0 32.0 37 29 - 46 + 20 + 25 1450 270 t3 10 0054 0142 0230 8.0 32.0 37 29 - 46 + 20 + 25 1450 330 t4 20 0055 0143 0231 9.0 36.0 38 22 - 46 + 25 + 30 1900 330 t4 10 0056 0144 0232 9.0 36.0 38 22 - 46 + 25 + 30 1900 60 v dc at + 85 c;. 40 v dc at + 125 c 27 t1 20 0057 0145 0233 3.0 12.0 10.2 144 - 24 + 10 + 12 700 27 t1 10 0058 0146 0234 3.0 12.0 10.2 144 - 24 + 10 + 12 700 100 t2 20 0059 0147 0235 4.0 20.0 19 54 - 36 + 12 + 15 1100 100 t2 10 0060 0148 0236 4.0 20.0 19 54 - 36 + 12 + 15 1100 220 t3 20 0061 0149 0237 8.0 32.0 30 29 - 40 + 16 + 20 1400 220 t3 10 0062 0150 0238 8.0 32.0 30 29 - 40 + 16 + 20 1400 270 t4 20 0063 0151 0239 9.0 36.0 27 23 - 45 + 20 + 25 1850 270 t4 10 0064 0152 0240 9.0 36.0 27 23 - 45 + 20 + 25 1850 standard ratings/extended ratings: clr81, m39006/25-xxxx capacitance (f) case code cap. tol. ( %) part no. m39006/25- (1) failure rate level (%/1000 h) max. dcl (a) at max. df at + 25 c (%) max. imp. at - 55 c ( ? ) max. capacitance change (%) at max. (1) ripple current at + 85 c 40 khz (ma) m 1.0 p 0.1 r 0.01 + 25 c + 85 c + 125 c - 55 c + 85 c + 125 c notes (1) dash number will include the letter h to indicate the optional vibrat ion and shock requ irements (i.e., 51 g random vibration, 80 g sinusoidal vibration and 500 g shock). (2) for ripple current limits at various temperatures, voltages and frequencies, see ripple current table.
m39006/22, m39006/25 www.vishay.com vishay revison: 28-aug-12 10 document number: 40022 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes 1. at + 125 c the rated voltage of the capacitors decrease s to 66 2/3 % of the + 85 c rated voltage. 2. the peak of the applied ac ripple voltage plus the applied dc voltage must not exceed the dc voltage rating of the capacitor eitherforward or reverse. 3. the ripple current listed represents a rating calculated using a maximum internal temperature rise ( ? t) of + 50 c at 40 khz at + 85 c ambient with a maximum peak rated voltage of 66 2/3 % of the + 85 c peak voltage rating. 4. the maximum allowable internal temperature rise ( ? t) decreases linearly to a calculated + 10 c rise at + 125 c ambient. 5. the internal temperature rise is directly proportional to th e equivalent series resistance of the capacitor and equivalent se ries resistance increases with decreasing frequency. 75 v dc at + 85 c; 50 v dc at + 125 c 22 t1 20 0065 0153 0241 3.0 12.0 8.5 157 - 19 + 10 + 12 600 22 t1 10 0066 0154 0242 3.0 12.0 8.5 157 - 19 + 10 + 12 600 82 t2 20 0067 0155 0243 4.0 24.0 15.2 63 - 30 + 12 + 15 1000 82 t2 10 0068 0156 0244 4.0 24.0 15.2 63 - 30 + 12 + 15 1000 180 t3 20 0069 0157 0245 9.0 36.0 24.4 30 - 35 + 16 + 20 1300 180 t3 10 0070 0158 0246 9.0 36.0 24.4 30 - 35 + 16 + 20 1300 220 t4 20 0071 0159 0247 10.0 40.0 37.0 24 - 40 + 20 + 25 1800 220 t4 10 0072 0160 0248 10.0 40.0 37.0 24 - 40 + 20 + 25 1800 100 v dc at + 85 c; 65 v dc at + 125 c 10 t1 20 0073 0161 0249 3.0 12.0 4.5 200 - 17 + 10 + 12 800 10 t1 10 0074 0162 0250 3.0 12.0 4.5 200 - 17 + 10 + 12 800 39 t2 20 0075 0163 0251 5.0 24.0 10.4 80 - 20 + 12 + 15 1300 39 t2 10 0076 0164 0252 5.0 24.0 10.4 80 - 20 + 12 + 15 1300 68 t3 20 0077 0165 0253 10.0 40.0 11.3 40 - 30 + 14 + 16 1600 68 t3 10 0078 0166 0254 10.0 40.0 11.3 40 - 30 + 14 + 16 1600 120 t4 20 0079 0167 0255 12.0 48.0 25 30 - 35 + 15 + 17 2000 120 t4 10 0080 0168 0256 12.0 48.0 25 30 - 35 + 15 + 17 2000 125 v dc at + 85 c; 85 v dc at + 125 c 6.8 t1 20 0081 0169 0257 3.0 12.0 6.0 300 - 14 + 10 + 12 700 6.8 t1 10 0082 0170 0258 3.0 12.0 6.0 300 - 14 + 10 + 12 700 27 t2 20 0083 0171 0259 5.0 24.0 7.2 90 - 18 + 12 + 15 1200 27 t2 10 0084 0172 0260 5.0 24.0 7.2 90 - 18 + 12 + 15 1200 47 t3 20 0085 0173 0261 10.0 40.0 7.9 50 - 26 + 14 + 16 1500 47 t3 10 0086 0174 0262 10.0 40.0 7.9 50 - 26 + 14 + 16 1500 82 t4 20 0087 0175 0263 12.0 48.0 17.4 32 - 30 + 15 + 17 1900 82 t4 10 0088 0176 0264 12.0 48.0 17.4 32 - 30 + 15 + 17 1900 clr79, clr81 ripple current multipliers vs. frequency, temperature and applied peak voltage frequency of applied ripple current 120 hz 800 hz 1 khz 10 khz 40 khz 100 khz ambient still air temp c temp c temp c temp c temp c temp c ? 55 85 105 125 ? 55 85 105 125 ? 55 85 105 125 ? 55 85 105 125 ? 55 85 105 125 ? 55 85 105 125 % of applied voltage 100 % 0.60 0.39 - - 0.71 0.43 - - 0.72 0.46 - - 0.88 0.55 - - 1.0 0.63 - - 1.1 0.69 - - 90 % 0.60 0.46 - - 0.71 0.55 - - 0.72 0.55 - - 0.88 0.67 - - 1.0 0.77 - - 1.1 0.85 - - 80 % 0.60 0.52 0.35 - 0.71 0.62 0.42 - 0.72 0.62 0.42 - 0.88 0.76 0.52 - 1.0 0.87 0.59 - 1.1 0.96 0.65 - 70 % 0.60 0.58 0.44 - 0.71 0.69 0.52 - 0.72 0.70 0.52 - 0.88 0.85 0.64 - 1.0 0.97 0.73 - 1.1 1.07 0.80 - 66 2/3 % 0.60 0.60 0.46 0.27 0.71 0.71 0.55 0.32 0.72 0.72 0. 55 0.32 0.88 0.88 0.68 0.40 1.0 1.0 0.77 0.45 1.1 1.1 0.85 0.50 standard ratings/extended ratings: clr81, m39006/25-xxxx capacitance (f) case code cap. tol. ( %) part no. m39006/25- (1) failure rate level (%/1000 h) max. dcl (a) at max. df at + 25 c (%) max. imp. at - 55 c ( ? ) max. capacitance change (%) at max. (1) ripple current at + 85 c 40 khz (ma) m 1.0 p 0.1 r 0.01 + 25 c + 85 c + 125 c - 55 c + 85 c + 125 c notes (1) dash number will include the letter h to indicate the optional vibrat ion and shock requ irements (i.e., 51 g random vibration, 80 g sinusoidal vibration and 500 g shock). (2) for ripple current limits at various temperatures, voltages and frequencies, see ripple current table.
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.

▲Up To Search▲

Price & Availability of M3900622-0441H

	To Download M3900622-0441H Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .